Cable Reels
   

WIKA HIRSCHMANN # 068-154-060-049, Altec # 970466325 Spare Parts List Ref. WIKA QTY: DESCRIPTION: 1 064‐360‐061‐552 1 Sensor, Angle, WGC360/1552 2 067‐153‐050‐019 3 Standoff, M6x136.5mm, M/F, 8mm Hex 3 068‐000‐100‐088 1 2 Conductor Slip Ring Kit 4 067‐153‐100‐010 1 Housing, W/Cover, Spring, & Cable Drum 5 000‐214‐340‐013 1 PG13.5 Hole Plug 6 092‐000‐060‐387 1 Connector, 5 Pin Male Receptacle 7 068‐000‐300‐120 1 Board, 1xL, A2B CAN 8 067‐153‐050‐024 1 Standoff, M6x126.5mm, M/F, W/22mm Cutout 9 068‐000‐110‐025 1 Gear Wheel 90T…

lwg154 cable reel

WIKA HIRSCHMANN # 068-154-060-029 National# xxxxxx LWG154 Cable Reel: The cable reel houses the length-angle transducer, slip ring disc and slip ring pick up (to feed and return A-2-B signal). The cable goes through the drum and out to the tip where it is wired to the Anti-Two-Block switch. The reel is driven by a tensioned spring and should be handled with caution. The Length-Angle Transducer: The length-angle sensor (LWG) is a combination of two transducers in cable reel, fitted at the…

lwg508 cable reel

WIKA HIRSCHMANN # 068-508-060-008 Altec # 970414009 LWG508 Cable Reel: The LWG508 cable reel houses the length-angle transducer, slip ring disc and slip ring pick up (to feed and return A-2-B signal). The cable goes through the drum and out to the tip where it is wired to the Anti-Two-Block switch. The reel is driven by a tensioned spring and should be handled with caution. The Length-Angle Transducer: The length-angle sensor (LWG) is a combination of two transducers in cable…

lwg511/03 cable reel

WIKA HIRSCHMANN # 068-521-060-009 (903165) Manitex # 4800850-013  Additional Information Telescopic boom lengths up to 150 feet Sensor Output signals via CAN BUS The power supply voltage is +12/24 vdc Exact measurement of boom length and boom angle Typically used with the Manitex cScale LMI systems, this cable reel assembly includes CAN BUS boom angle and length sensors.   Cable Reel: The cable reel houses the length-angle transducer, slip ring disc and slip ring pick up (to feed and return…

lwg511/03 cable reel

WIKA HIRSCHMANN # 060955 Link Belt # N4L004 LWG511/03 Cable Reel: The cable reel houses the length-angle transducer, slip ring disc and slip ring pick up (to feed and return A-2-B signal). The A2B cable goes through the drum and out to the tip where it is wired to the Anti-Two-Block switch. The reel is driven by a tensioned, tempered steel spring. The Length-Angle Transducer: The length-angle sensor (LWG) is a combination of two transducers in cable reel, fitted at…

lwg508 cable reel

WIKA HIRSCHMANN # 068-308-060-001 Manitowoc Grove # 9333103873 LWG308 Cable Reel: The cable reel houses the length-angle transducer, slip ring disc, and slip ring pick up (to feed and return A-2-B signal). The A2B cable goes through the drum and out to the tip where it wires to the Anti-Two-Block switch. A tensioned, tempered steel spring drives the reel. The Length-Angle Transducer: The length-angle sensor (LWG) is a combination of two transducers in cable reel, which is fitted at the…

GS112 cable reel

LSI Trimble GS112 Cable Reel: The stainless steel cable in the GS112 can terminate at the end of the first telescoping section on a proportional boom, which eliminates the need to run the cable all the way to the boom tip and reducing cable breakage. Unlike competitors, the LSI Anti-Two-Block System is wireless. The wireless feature allows for a stronger cable reel cable by eliminating the need to move the A2B signal through it. A stronger cable helps to prevent…

gs110 wireless cable reel

GS110 Cable Reel Information: The Cable Reel is entirely made of stainless steel with scaled bearings and a stainless steel wire. The Mini Cable Reel frame is 9.13” wide X 7.25” tall, and its compact design will retrofit onto a diverse range of crane types. Angle sensor accuracy is .2 degrees. The transmitter box operates with one “D” cell lithium battery 3.6 or alkaline 1.5 V, providing 1 to 2 years battery life for typical applications. Designed for two styles…